Voltex® 3 in 1 Bathroom Heaters are the ideal complete quick and easy option for Heat, Exhaust Ventilation and Light.

The 13w tri-colour downlight gives a powerful 1000 lumens, while the extraction fan has been designed to really work, with an air movement capacity of 360m3/hr (when tested to ISO 5801 standard). Comes with the Voltex 3-gang plate with printed switches, 3metre flexible ducting, ducting clamps, exhaust vent and plaster screws - everything you need to get the job done.

Improvements

• Stronger air movement (from 300m3/hr --> 360m3/hr, with only a slight increase in noise 50.0dB --> 51.5dB)
• LED light now dimmable.
• Soft dampener included on the draft-stopper, prevents any rattling sounds from cross-winds in the roof.
• Insect mesh is fitted to the grill.
• Terminal tunnels are a generous 4.2mm diameter.
• Cable clamp area is designed to give best terminal access.
• Provision for Cable tie outside of terminal housing.
• Increases cable entry hole and knockout for larger hole when needed.

Features

• 3 in 1. Heat, Ventilation and Light.
• LED 13 Watt, Tri-colour
• White Finish
• Mounting brackets for easy installation, with plaster screws included to ensure a flush fit to the roof
• 120mm ducted outlet with draft-stopper
• 3 Year Warranty from date of purchase

Supplied with

• Classic 3 Gang Switch, 3 x CSM16 mechs marked Heat, Light & Fan
• 2 x 275W Heat lamps
• 1x integrated 90mm 13W tri-colour downlight
• 3m 120mm flexible duct, 1x 120mm exhaust vent and 2x Stainless Steel ducting clamps.

Note: Motor speed can not be reduced using a speed-controller.

Max Heat Lamp rating: 275W